The AiM Sports MXS data logging dash represents a huge leap forward in racing display flexibility. The brilliant 800x480 pixel (5" diagonal) TFT display frees you from the constraints of a single, factory-designed LCD display. The MXS shows you the data you want, the way you want.
Eight analog input channels can sample, log, and display a wide range of temperatures, pressures, or potentiometers (throttle position, steering position, etc). A CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda (O2), SmartyCam, or even channel expansion hubs, without using any analog channels! The MXS can also be connected to many different ECUs to log any data gathered by the ECU. An internal 3-axis g-force sensor, internal gyroscope, GPS05 module, 4 wheel speed channels, a lap time receiver input, and 2 digital outputs round out the package. It all adds up to a flexible, expandable data logger that can grow with you.
The super-compact 6.5" x 3.8" anodized aluminum housing is designed to fit the smallest formula car cockpit. The wide, auto-dimming display can be set by the user to a number of different full-color screen designs. You can even create up to 8 different pages, all using different screen designs. Ten configurable shift light LEDs across the top of the housing and 6 configurable alarm LEDs along the sides can all be programmed with any of 7 colors. Each alarm can be programmed with a steady or flashing LED, a custom text message on the screen, and multiple conditions (for example, oil pressure below 60 psi and engine speed above 4000 RPM... or over-rev by 200 RPM keeps the light on steady until power-off, while over-rev by 500 RPM makes the same light flash until data is downloaded... ). Two digital outputs (1 amp @ 12v) can be used to trigger external warning lights, fan relays, etc based on similar logic as the alarms. The shift lights can be programmed separately for each gear, if desired. Set them to come on sooner in low gears and closer to redline in high gears, set different colors for each gear, and more!
The 4GB non-volatile memory can store many hours of information for detailed analysis using AiM's latest Race Studio 3 software. All of the data can be downloaded to your computer using a built-in secure Wi-Fi connection (no cable required). Requires 9 - 15V external power supply.
Note: There are two versions of this unit - (1) Digital Dash and (2) Digital Dash Data Logger. The Digital Dash version is a display only, does not record any data, and does not include the GPS05 module. The Digital Dash Data Logger adds features to the Digital Dash by including a GSP05 module and can record data.
**Digital Dash photos shown in standard and 'street icon' versionsKit Contents
- MXS digital data w/5" TFT display (standard or street icon versions)
- Wiring harness with 37-pin Deutsch connector
- GPS05 module (included with Digital Dash Logger only)
- Race Studio 3 software.
- All sensors sold separately.
- Compact 5” TFT High Contrast TFT Display - Fully user configurable
- Choice of standard or Street Icon" versions display
(street icon: fuel, oil, water, temp, etc. -- similar to factory cluster icons)
- 6 configurable RGB alarm LED's
- A 10 RGB LED shift light array
- WiFi connectivity
- Three CAN connections
- Connections with industry leading 700+ ECUs
- A 3-axis accelerometer + gyroscope
- 8 analog inputs at a max 1000 Hz each
- 4 digital speed inputs
- Coil RPM input
- A lap signal input
- 2 digital outputs
- Real-time fully configurable math channels
- All this is housed in a waterproof aluminum chassis with sealed side mounted aluminum buttons for quick easy interaction.
AiM MXS Strada 5" TFT Display Digital Dash
Cancer & Reproductive Harm